Port Dock Holding
portdock.coProgomma Trading do Brasil

Port Dock / PD Trading / Compound mixing

RUBBER COMPOUNDS

Compound mixing line

From dosing to the cooled and stacked compound, with internal mixers, sheeting and batch-off coolers.

Batch-off cooler: equipment that cools and stacks the compound sheet at the end of the mixing line.

N330N55005 m12345678910

Scroll sideways to see the whole line.

Complete mixing line, drawn to scale, from raw material storage to the stacked compound.

1 Carbon black silos2 Oil tanks3 Chemicals weighing room4 Rubber feeding5 Carbon black scale6 Internal mixer7 First mill8 Mill with stock blender9 Batch-off cooler10 Stacker

Tangential and intermeshing

Tangential. The wings do not cross: shear happens between the wing and the chamber wall. 2, 4 or 6-wing rotors, high fill factor and short cycles.
Intermeshing. The lobes interlock: shear also happens between the rotors, with better temperature control.

Rotor types

2-wing tangential rotor: one long and one short wing, with opposite helices
2-wing tangential. One long and one short wing, with opposite helices. General purpose and temperature-sensitive compounds.
4-wing tangential rotor: two long and two short wings
4-wing tangential. Two long and two short wings. Higher shear and shorter cycles.
6-wing tangential rotor: three long and three short wings
6-wing tangential. Three long and three short wings. High output for carbon black masterbatch.
Pair of intermeshing rotors: the lobes of one rotor enter the space of the other
Intermeshing. The lobes of one rotor enter the space of the other. Fine dispersion at lower temperature.

Banbury and kneader

Banbury. Fixed chamber with bottom drop-door discharge; installed on a platform.
Kneader. Tilting chamber; floor-mounted, for smaller batches and frequent compound changes.

Size range

EquipmentRangeHighlights
Tangential mixer5 a 580 L2, 4 or 6-wing rotors; up to 2,500 kW at 430 L
Intermeshing mixer5 a 420 LHydraulic ram; 1:1 rotors
Kneader3 to 200 L working volume140° or hydraulic tilting
Twin screw sheeter1.5 a 11 t/hConical screws and cooled rolls
Mixing millØ160 to 810 mmOptional stock blender and hydraulic nip adjustment
Batch-off coolerSheets from 400 to 900 mmHanger type or layered mesh belts

Batch-off coolers

Hanger type. Sheet hung on bars, with forced air and wig-wag stacking.
Layered belts. Sheet carried on stacked mesh belts.

Drawings and equipment

Elevation drawing of a 160 L mixing line
Layout of a 160 L line: 18.6 m long.
Technical drawing of a hanger-type batch-off cooler
Hanger-type batch-off cooler.
Internal mixer with motor and gearbox
Internal mixer.
Mill with stock blender
Mill with stock blender.
Twin screw sheeter
Twin screw sheeter.
Batch-off cooler with fans
Batch-off cooler.

PROGOMMA TRADING DO BRASIL · GROUP COMPANY

Raw materials for this line

Elastomers, carbon black, light-coloured fillers and process chemicals for your compounds.

View raw materials

Tell us about your project

Send us your plant data and PD Trading’s engineering team will size the line.

Size my mixing line