L/D: ratio between the length and the diameter of the extruder screw.
Scroll sideways to see the whole line.
Extrusion-calendering line, drawn to scale.
1 Feeding with metal detector2 Pin-barrel extruder3 2-roll calender4 Thickness gauge5 Cooling drums6 Accumulator7 Double wind-up with liner8 Panels and control desk
Cold-feed pin-barrel extruder

| Screw (mm) | 90 | 120 | 150 | 200 | 250 |
|---|---|---|---|---|---|
| L/D ratio | 14:1 | 14:1 | 16:1 | 18:1 | 12:1 |
| Power (kW) | 55 | 90 | 200 | 315 | 400 |
| Capacity (kg/h) | 360 | 800 | 1,500 | 2,600 | 3,600 |
Wide die head with hydraulic opening

Extrusion-calendering line
| Item | Reference line |
|---|---|
| Pin-barrel extruder | 200 mm × 16D, 355 kW, ≥ 2,800 kg/h |
| 2-roll calender | Ø400 × 1,300 mm, 3–30 m/min |
| Product | Up to 1,050 mm wide, from 0.5 mm thick |
PROGOMMA TRADING DO BRASIL · GROUP COMPANY
Raw materials for this line
Natural rubber, synthetic elastomers, fillers and process chemicals for the compounds run on the line.
Tell us about your project
Send us your plant data and PD Trading’s engineering team will size the line.

